🤖Robot Design Search

1lb. Plastic Antweight robot, competed at multiple competitions and placed 1st & 2ndPrinting/Assembly Info:-Print everything at 100% Infill-Set wall perimeters to 6, top/Bottom at 3-Weighs 427gElectronics Needed:-4 N20 Motors-1 Dual Motor Controller-1 Reciever-1 Switch-1 3S Lipo Battery-2 Wire harnesses for parallel motorsOther Materials Needed:-4 40mm Wheels(Pololu)-5 M3x5mm screws-4 Zip ties-4 M3x30 screws-4 M3 Nuts(Not needed, but can be used in case holes are stripped on bot).