🤖Robot Design Search

I designed this 3D printed upgrade that I call Joint for lower body m1 .i design is 3D printed component because I wanted to give this modelrobot the ability to bend sideways as well as you see in the photos.If you wish to download this file, depending upon your 3D printer andyour skill level with one set your 3D printer accordingly, after you'redone 3D printing the components you will need a dremel power tool orsomething similar to it along with the right drill bits for this Project,also you will need some sandpaper, some super glue, also you will needtwo leftover pieces from your frame Arms model kit and you need aleftover PC joint part that came from your model kit and also you willneed a stick from your parts tree that came with your model kit as wellas you will see in the photos, the photos will give you an idea how toput everything together, I need to tell you you will also you will needto use your dremel power tool or something similar to it to remove anyexcess material in the whole area where the PC joint piece will go in onboth of the 3D printed components so be careful with that and not use adrill bit that is too large, and from that point on the photo should giveyou an idea how to put everything else together after that you're done soenjoy.